新浪微博腾讯微博|||Online MessageWelcome to ZhongDe Bearing Manufacture Co., Ltd

Keyword: 20072  请输入关键词搜索  22207  230 1060  22206  as

current position:Home > News > Industry news > Bearing the safety precautions of bearing tip for you

Bearing the safety precautions of bearing tip for you

from:未知editor:adminhot:time:2016-09-30 08:59【big middle small
Bearing safety precautions:
Bearing safe use must check to check the size of its vibration and sound, temperature, and the condition of the lubricant (color and viscosity change, whether there is a foreign body), bear in mind that the amount of lubricant, must be moderate, more waste, less is not a proper role, in use process, don't exceed the speed limit, because of excessive heat or burn and cause damage, if the working temperature of more than 100 degrees, then the oil should be replaced with 2-3 times a year or so, in the process of transportation, large and heavy bearing must be use a forklift or crane handling,
A, can protect the bearing,
2, can prevent parts handling personnel, do not attempt to remove or modified bearing, otherwise may result in bearing damage or equipment failure in advance, don't let water, metal, or dust into the bearing internal, otherwise may cause damage,
Also, before using bearing, have to confirm of the lubricant on bearing without lubricant, may be because of overheating and damage to the bearings.
Deposit if the bearing line must have the condition to: dry, clean, no dust, prevent to enter into the bearing, the shade, don't let the sun, there must be higher than the ground 30 cm, when you install and remove the bearing, be sure to use a special tool.Using these tools, please will tool with a clean cloth to wipe clean, confirm whether there is a crack, burr, damage, flake or deformation, etc.
Only according to strict operation, can guarantee the bearing of the normal use, if you have any specific questions, please contact with our company!

Recommended products